Author Topic: Can anyone reccomend a solder  (Read 10615 times)

Offline TopRound‎

  • Certifiable
  • ***
  • Posts: 111
Can anyone reccomend a solder
« on: December 25, 2022, 05:55:00 PM »
Got my son a Bottlehead kit to build. Is there a solder people prefer to use for audio gear that has sonic benefits as opposed to say just regular solder. Does audiophile solder make a difference or just snake oil?

any input as I don't solder and don't plan to.....

thanks

mike
System: Nothing....gave it all up, but building a few things for my kids...vinyl, tubes and Gan Fet!

Offline GDHAL

  • Audio Neurotic
  • *****
  • Posts: 2022
  • All we need is music, sweet music
Re: Can anyone reccomend a solder
« Reply #1 on: December 25, 2022, 06:03:51 PM »
Yes, there are audiophile appropriate solder. Here's a thread on AG about it.

https://forum.audiogon.com/discussions/best-solder?

I think Pete from TWL uses correct solder. He would be a good person to chime in or contact.

Best

Hal

EDIT: another good person to reach out to with solder questions would be Ralph Karsten at Atmasphere
« Last Edit: December 25, 2022, 06:06:49 PM by GDHAL »
GoldenEar Triton Reference (pair), Musical Fidelity M6si, Schiit Yggdrasil-OG-B, Oppo UDP-205, Emotiva ERC-3, LG OLED65C9PUA, Salamander Synergy Triple Unit SL20, Audeze LCD-X, GIK acoustic paneling
http://halr.x10.mx/other.html

Offline S Clark

  • Audio Neurotic
  • *****
  • Posts: 1330
Re: Can anyone reccomend a solder
« Reply #2 on: December 25, 2022, 07:43:38 PM »
This is quality stuff.  Cardas Quad eutectic, melts evenly and under 200*C.  Expensive but not stupid.  I resoldered my JVC TT81 turntable... probably 100+ solder joints. 
https://www.amazon.com/Cardas-Soldering-Eutectic-Silver-Solder/dp/B015X68HXW
Speaker-GR Research LS9-XStatik-AltecFlamenco
Amp-Moscode,Dodd,Folsom
Pre-Dodd
Turntable-Vyger,Victor,TechnicSP10MK2
Phonopre-Hagermann,Jolida,GSlee   
Cable-AudioSensibility Wywires TWL
Cartridge-Dynavector,Sumiko
Tonearm-PioneerP3,Jelco
Rythmic sub

Offline ejk

  • Obsessively Audiophilic
  • ****
  • Posts: 660
  • Did I say no dropouts ?
Re: Can anyone reccomend a solder
« Reply #3 on: December 26, 2022, 02:55:43 AM »
Yes, there are audiophile appropriate solder. Here's a thread on AG about it.

https://forum.audiogon.com/discussions/best-solder?

I think Pete from TWL uses correct solder. He would be a good person to chime in or contact.

Best

Hal

EDIT: another good person to reach out to with solder questions would be Ralph Karsten at Atmasphere

Since Nick locked the other thread, I wanted to add this.

Did you hand tighten or torque? :thumb:

https://emotivalounge.proboards.com/thread/60385/erc-loading-tray-stuck-closed
Aric Audio Super 6SN7 Line, Orchard Audio Starkrimson Ultra, Quicksilver Mid Monos, Lumin U2 Mini, Denafrips Pontus II 12th-1,Denafrips Iris DDC, Spatial Audio M3 Saphire, Hapa Audio Interconnects, TWL power cords, TWL speaker cables, Wireworld USB, i2s.

Offline GDHAL

  • Audio Neurotic
  • *****
  • Posts: 2022
  • All we need is music, sweet music
Re: Can anyone reccomend a solder
« Reply #4 on: December 26, 2022, 06:02:08 AM »
Hi Evan. Interesting that you should find that very recent thread of mine. I write interesting because I wouldn't have thought you check the Emotiva forum.

In answer to your question, I tightened (of course after removing in order to gain access) the screws (15 Phillips head) using a standard hand held screwdriver. I did not measure torque in any way. Once the screw was snug and tight (to the extent one cannot loosen it with fingers alone) I moved on to the next screw, until all 15 we're back in place.

Overtightened screws are no good. It leads to striped heads and conceivably other problems.

I'm really glad I was able to resolve the issue.  :)

Best.

Hal


Yes, there are audiophile appropriate solder. Here's a thread on AG about it.

https://forum.audiogon.com/discussions/best-solder?

I think Pete from TWL uses correct solder. He would be a good person to chime in or contact.

Best

Hal

EDIT: another good person to reach out to with solder questions would be Ralph Karsten at Atmasphere

Since Nick locked the other thread, I wanted to add this.

Did you hand tighten or torque? :thumb:

https://emotivalounge.proboards.com/thread/60385/erc-loading-tray-stuck-closed
GoldenEar Triton Reference (pair), Musical Fidelity M6si, Schiit Yggdrasil-OG-B, Oppo UDP-205, Emotiva ERC-3, LG OLED65C9PUA, Salamander Synergy Triple Unit SL20, Audeze LCD-X, GIK acoustic paneling
http://halr.x10.mx/other.html

Offline HAL

  • Audio Neurotic
  • *****
  • Posts: 1270
  • Audio Mad Scientist
    • Hollis Audio Labs
Re: Can anyone reccomend a solder
« Reply #5 on: December 26, 2022, 06:12:43 AM »
My favorite solder and been using it for years for audio gear.  I like eutectic solder.  Out of stock, but found it on Ebay as well.

https://www.radioshack.com/products/silver-bearing-solder?_pos=3&_sid=bf923b4a9&_ss=r

Offline rollo

  • Industry Participant
  • *
  • Posts: 6982
  • Rollo Audio - Home demo the only way to know
Re: Can anyone reccomend a solder
« Reply #6 on: December 26, 2022, 09:28:14 AM »
  Lead free silver solder. Enjoy the build.

charles
contact me  at rollo14@verizon.net or visit us on Facebook
Lamm Industries - Aqua Acoustic, Formula & La Scala DAC- INNUOS  - Rethm - Kuzma - QLN - Audio Hungary Qualiton - Fritz speakers -Gigawatt -Vinnie Rossi,TWL, Swiss Cables, Merason DAC.

Offline jmc207

  • Seeking Help
  • **
  • Posts: 13
Re: Can anyone reccomend a solder
« Reply #7 on: December 28, 2022, 09:59:51 PM »
In his video on soldering Doc Smalle mentions eutectic solders like Kester 63/37 or the Cardas leaded version being good and the easiest to work with. Or, no more than 2% silver solder if you want to go that way.

https://www.youtube.com/watch?v=EN16Pi7pcfk

Offline Triode Pete

  • Industry Participant
  • *
  • Posts: 1466
  • Strive for Perfection, Settle on Excellence!
    • Link to System Details & Photos
Re: Can anyone reccomend a solder
« Reply #8 on: December 29, 2022, 11:33:08 AM »
Quad Eutectic Solder patented by Western Electric... http://www.cardas.com/solder.php

Cheers,
Pete

www.TriodeWireLabs.com
WT Reference/Lyra Titan I
Quadratic Audio MC-1
Custom BorderPatrol preamp with phono & line stage
Innuos Statement Server
BorderPatrol S20 EXD w/EXS PS
Klipschorns - Volti hot-rodded
UberBUSS