Self Medicating > General DIY

Component rack - DIY or buy?

(1/5) > >>

mdconnelly:
I started down the path of wanting to design and build a component rack that would compete with the $1k racks on the market, hoping to build it for far less.   I liked the fully adjustable concept of the Mapleshade Samson racks.  

Unfortunately, as I compiled the cost of the shelves and related hardware, it became obvious that it wasn't going to be cheap - likely still well over $500 for a 4 shelf rack.  Given that price, buying may be the better option.

The 3 racks I've investigated that are in the <$1k range include:

1) Mapleshade Samson: http://www.mapleshaderecords.com/audioproducts/samson1.php

2) Adona - modular or fixed: http://www.adonacorporation.com/products.html

3) Apollo Aria: modular http://www.apollohifi.co.uk/modular.htm

The Adona is an interesting and beautiful design - but at the top of my price range - 4 shelf version just over $1k.

Turns out the Apollo Aria is quite affordable (4 shelf around $600).  I've also seen posts where they replaced the MDF shelves with Neuance shelves with the Aria (i.e. room to improve later).

So... I'm looking for advice and ideas.    Cheap is good (more $$ for future component upgrades ;-).    What's under your components?

miklorsmith:
I'm using a couple of Salamader racks from Audio Advisor and love them.  They're burly, incredibly configurable, nice to look at and within your range.  Add them to the list of possibilities.

I got the maple finish with steel mesh side panels and doors.  The mesh is very cool, as you can somewhat see the components through but they're not staring at you.  Remotes can see threough the mesh too.

I got casters for the main rack and put some ceramic tiles on top of the carpet.  I can roll the rack away from the wall to get to the guts, then roll it back tight for normal usage - it's a slick system.

Good luck!

stereofool:
Although not as structurally rigid as a welded rack...I have made several DIY 'racks' for my audio system and HT systems.

If you have any wood working tools, or access to someone who does, then you can make yourself some racks very inexpensively.

Just make your choice of shelf material (wood of course)...plywood, mdf, solid, etc. Decide what dimensions that you need, then cut your shelves to size. Stop by your local hardware center and pick up 4 pieces of 3/4" threaded rod...in whatever height you want you rack(s) to be, also get a box of 3/4" nuts. Now just drill 3/4 " holes (or slightly larger) in each corner. Put whatever finish you want on your shelves, then assemble by putting a nut on each rod...one rod in each corner...place another nut to hold/clamp the shelf...repeat process for as my shelves as you have.

You should be able to build a reasonably sturdy rack for under $100...cheap enough  :D !

WEEZ:
Have a look at the ZRACK from Decware. It appears to be available in a (5) shelf only..but has a 42" high option. Nice look and available with different wood tones. (can't link it; but go to www.decware.com and you will find it under 'tube gear' if you scroll down)

I use a SolidSteel 5.4 series which is available from MusicDirect. Click on Solid Steel under 'shop by brand'.
www.musicdirect.com

The Mapleshade is a real nice rack...

WEEZ

richidoo:
I got one of these from Standout Designs for about $1k. It had to look good in the living room where my system used to be, and it is gorgeous in cinammon maple stain. It is also incredibly well built, solid maple wood and the service from this company was perfect. The interior space is 19" wide so if you have tall tubey kids of components they will fill up the inside bays quickly. Regular rectangular box components can fit about 6 inside. But the advantage is the big flat top is great for TT, tube amps, whatever.

I was in Circuit City this morning looking for a high end tube preamp, :wink: and saw a huge collection of audio racks there. I'm sure they are geared towards style over substance, I didn't even take another glance except to notice how much floor space the were devoting to racks. Most were typical steel/glass type, probably very cheap, but some of them might even be welded and decent build. They also had some salamander shaped ones, but probably nowhere near as well built as the true salamanders which have aluminum channel frame. Those are really nice, and they are big enough to hold anything, even 23 inch deep HT receivers.

Just to stoke your nervosa about racks while you are in this vulnerable state, check out Grand Prix Audio.  :D

A zillion models of all prices viewable here: http://racksandstands.com/ but I never bought from them, so dunno....
Rich

Navigation

[0] Message Index

[#] Next page