http://www.rythmikaudio.com/I have read the website, it is very interesting!!
Any advice on using direct servo drivers in an open baffle speaker? I want ultra clean 95dB at 20Hz for organ and dance music. I think I would need at least 2 12" drivers per side to achieve this without direct servo, but with your improved accuracy with high excursion, maybe one is enough??? I know there is math to figure this, but that is just so daunting... I bought some Peerless XXLS but not used them yet. They are Fs 21Hz, pulp cones.
Can your drivers in OB play flat to 20Hz without resonance aberrations? I guess that is a lot easier with servo... But is it really just as clean through resonance as in the clear? What is the Fs of your driver? With metal cone, I guess it is way low so not an issue?
I have a digital external crossover (DCX-2496). Can I feed its signal to the direct servo amp, so that my crossover is used to crossover to midrange driver up to 300 Hz knee?
My mid driver in OB will roll off at about -12dB/oct I think... so if your bass driver is as fast and accurate as you claim
I would probably like to steepen up the crossover slopes as much as I can get away with to bring the full range driver down as low as possible. I can boost it some at 200Hz without a problem. So 150Hz is probably the lowest crossover frequency I can do. If I wanted a LR2nd order crossover at 200Hz would that be possible with your direct servo amp?
Thanks a lot Brian,
Rich