Author Topic: can some damaged tubes be revitalized  (Read 757 times)

Offline Nick B

  • Global Moderator
  • *****
  • Posts: 3232
can some damaged tubes be revitalized
« on: March 30, 2020, 07:25:51 PM »
Saw this on YouTube. I wasn’t aware this was possible. Comments, pls

https://www.youtube.com/watch?v=Uv0D1-2cVg0
Van Alstine SET 120 Control Amp
Supratek Chardonnay preamp
Fritz Carrera 7 BE speakers
Border Patrol SEi dac
Auralic Aries Mini & Mojo Audio lps
Audio Envy & Wywires cables
Roon, Tidal, Qobuz
PI Audio UberBUSS

Offline steve

  • Audiologist
  • *
  • Posts: 951
    • Reference components
Re: can some damaged tubes be revitalized
« Reply #1 on: March 31, 2020, 07:05:14 AM »
Yes Nick it is possible for Thoriated Tungsten cathodes, depending upon how much thorium is left in the interior cathode tungsten filament. IF I remember correctly, with no plate voltage, run the filament 20% above normal for a few minutes. Repeat as necessary. The thorium will "boil" to the surface and emission will increase, if there is thorium left.

The only oxide cathodes I have ever seen improve is in picture tubes. There are usually several stages of a picture tube rejuvenator one can try. The highest stage actually causes sparks inside the tube, ripping off the outer layer of oxide material from the cathode so fresh material is now on the surface. Sometimes it works, sometimes it ripped off all the material, or what was left.

cheers

steve

Steve Sammet (Owner/Designer, SAS Audio Labs, Ret)
"V" 40pf 1 meter 6N Pure Copper Wire ICs,
SAS Audio Labs Test Phono Stage
SAS 11A Perfect Tube Preamplifier
SAS 25 W Near Perfect Reference Triode/UL Monoblocks
2 way test Spkrs, 28hz -3db, to 20khz