we will use this thread to keep everyone updated in the new product releases starting with the following news.
1)
Integrated Hybrid Amplifiers - two models will be available. Both models based on the Purity Basis tube circuit. Both models will have home theater bypass as well as variable line outputs to control another power amplifier or powered subwoofer. Remote control will be standard.
a) First model will utilize Class D output stage providing 125 watts into 8 ohms and 250 into 4.
b) Second model will also use a Class D output stage but at 250 watts into 8 ohms and 500 into 4 ohms. More sophisticated, choke filtered power supply using all polypropylene filter capacitors.
2)
Stereo power amplifier. This is a high power stereo amplifier based on Class D technology and advanced power supply design. 250/500 watts. Built into the same chassis as used for the power supply in the Silver Statement linestage. We did this so you could place a Purity One or Reference preamp on top for the same look as the Silver Statement.
3)
Hybrid mono bloc amplifiers - We have been working on these for some time. Producing approximately 500 watts into 8 ohms and 700 into 4, these amps will drive most any speaker on the market. When working with the OEM on the amplifier stage, one of our requirements was to have amplifiers that were stable into 1-2 ohm loads
This design uses a new zero gain input tube stage providing a very good input impedance and low output impedance for the perfect transition to the amplifier stage. Utilizes a single 6922. There are a few very unique features that will be found within these amps but we do not want to disclose this information at this time.
There are two more big announcements to be made but I will hold off on these for just a little bit longer. Sorry