Author Topic: Sonic Singnature of Power Cords ????  (Read 251 times)

Offline rollo

  • Out Of My Speaker Cabinet
  • ******
  • Posts: 5377
  • Rollo Audio - Home demo the only way to know
Sonic Singnature of Power Cords ????
« on: August 29, 2018, 07:15:42 AM »
   So does your  power cord change tonality or just make it quieter ? Does it make it lusher, brighter, fuller, thinner or no harm ?? What difference did you actually hear that made you purchase it ?


charles

contact me  at rollo14@verizon.net or visit us on Facebook
Lamm - Aqua Acoustic Formula & La Scala DAC- INNUOS  - Rethm Speakers - PI Audio Uberbuss - Triode Wire Labs- Kuzma - Furutech - Audio Hungry Qualiton - Fritz Carrera speakers -Gigawatt-Arion

Offline gander

  • Seeking Help
  • **
  • Posts: 72
  • Insanity is doing the same Audio thing over & over
Re: Sonic Singnature of Power Cords ????
« Reply #1 on: August 29, 2018, 11:28:55 AM »
   So does your  power cord change tonality or just make it quieter ? Does it make it lusher, brighter, fuller, thinner or no harm ?? What difference did you actually hear that made you purchase it ?


charles

Who are you asking?

Gary
Oppo 103, SSD drive
GanderWire ultra low capacitance power cords, ICs and speaker cables
Audio Note 2.1B DAC
Tortuga LDR passive pre
Primaluna Dialogue4 Tube, Temple Audio Bantam SS amp
GW speakers w/Audio Nirvana 12Ē Alnico FR drivers

Offline Folsom

  • Certifiable
  • ***
  • Posts: 110
Re: Sonic Singnature of Power Cords ????
« Reply #2 on: August 29, 2018, 07:37:46 PM »
My own designed power cords just make everything more natural sounding. Nuanced. They don't radically change the sound, thank god... I don't need any goofy cords.

Offline Nick B

  • Administrator
  • Audio Neurotic
  • *****
  • Posts: 1504
Re: Sonic Singnature of Power Cords ????
« Reply #3 on: August 29, 2018, 07:56:18 PM »
The only time Iíve ever had a dramatic change was when I had the McCormack amp and I tried
Garyís 8 gauge solid core copper cord. It was a very dramatic improvement in the bass. Garyís current cords sound quite good, but I havenít had the time and inclination to do a serious a/b with my reference cuts. Also, as I donít have subs yet, there isnít much bass to judge with the mini kef LS 50s
« Last Edit: August 30, 2018, 06:34:46 AM by Nick B »
ICEpower 1200as2 stereo amp
Audio Hungary APR 204 preamp
KEF LS 50 speakers
Border Patrol SE dac
Auralic Aries Mini
Roon & Tidal
Don Sachs phono
Basis Ovation turntable
Graham 1.5 T tonearm
AT-ML150 cartridge
PI Audio Uber
All cables by Gary A

Offline BobM

  • Audio Neurotic
  • *****
  • Posts: 3108
Re: Sonic Singnature of Power Cords ????
« Reply #4 on: August 30, 2018, 05:07:59 AM »
Almost any power cord upgrade is going to improve bass over the stock cord. I think that's a given, but sometimes the bass is bloated and sometimes it's tight. Same with the treble. I think different metals in the cable, and especially the connectors, have a big effect on that. In general, here's what I found.

tin plated brass connectors - OK, not the best but better than stock. You will get more, but not necessarily "good" more

copper connectors - this is usually the go-to for most people. It is balanced and can have fine nuance in both the top and bottom ends without becoming tinny or hard, it can certainly sound warmer than other options

gold plated copper - usually helps to smooth out the highs and tighten the bottom a bit more than plain copper, and it is a more solid metal and less prone to bending

rose gold over copper - same as above but with a bit more bloom on the rose, warmer than plain gold

silver connectors - this will definitely open up the top end, sometimes too much. The bottom may sound leaner than copper but it is also much tighter. If your system sounds bloated normally you might want to go here, but if it is already transparent this is too much of a good thing

rhodium connectors - these act like a loudness filter, extending both top and bottom and making them tighter, but it can also be too much of a good thing, except on a subwoofer (meow)

Just what I found in my system. Of course, trying these on a CD player might result in different results than on an amp, or a preamp. It's all about tuning the flavor of an individual component.


Laugh and the world laughs with you. Cry and you'll have to blow your nose.

Offline rollo

  • Out Of My Speaker Cabinet
  • ******
  • Posts: 5377
  • Rollo Audio - Home demo the only way to know
Re: Sonic Singnature of Power Cords ????
« Reply #5 on: August 30, 2018, 09:07:40 AM »
  So far Folsom choose a cord that offers no or little color. I agree. Color can be bright, warm, more bass more treble and so on. What I have found over the years is that I desire no color just a quieter background. Then condition line.
The other pet issue is wire Ga. We have 10ga at the wall. We add say an 8 ga. cord  which is connected to much smaller ga inside component. Does different and competing LCR's of wires hinder flow of power ? Would it not be better to use appropriate ga. for current draw of component. Then maximize design with better wire, dielectric, shielding, coatings and  connectors ?


charles
contact me  at rollo14@verizon.net or visit us on Facebook
Lamm - Aqua Acoustic Formula & La Scala DAC- INNUOS  - Rethm Speakers - PI Audio Uberbuss - Triode Wire Labs- Kuzma - Furutech - Audio Hungry Qualiton - Fritz Carrera speakers -Gigawatt-Arion

Offline P.I.

  • Obsessively Audiophilic
  • ****
  • Posts: 501
  • Silence is that blackness beneath the music
    • P.I. audio group, LLC
Re: Sonic Singnature of Power Cords ????
« Reply #6 on: August 31, 2018, 11:38:04 AM »
My own designed power cords just make everything more natural sounding. Nuanced. They don't radically change the sound, thank god... I don't need any goofy cords.
:thumb:
"A man with an experience is never at the mercy of a man with an argument." - Hilmar von Campe