Author Topic: I am manufacturing my V Interconnect Cables again  (Read 6904 times)

Offline steve

  • Audiologist
  • *
  • Posts: 1239
Re: I am manufacturing my V Interconnect Cables again
« Reply #15 on: December 28, 2018, 07:31:22 AM »
Gents, I was just given a Mode 2, and it sounds very nice indeed. However, along with the Mode 2, I was also given a
6 foot walmart usb cable to use. Nice since I don't have a usb cable myself.

I was wondering if anyone would be willing to loan me a spare usb cable for experimentation and possible short review?
I would like to find out if and how much difference a usb cable might make vs a cheapy.

Of course I would return your usb cable in a week or two, you set the time limit.

cheers

steve
Steve Sammet (Owner, Electron Eng, SAS Audio Labs, Ret)
SAS "V" 39pf/m 6N copper ICs,
SAS Test Phono Stage
Acutex 320 STR Mov Iron Cart
SAS 11A Perfect Tube Preamp
SAS 25 W Ref Triode/UL Monoblocks
2 way Floor Standing Test Speakers

Offline S Clark

  • Audio Neurotic
  • *****
  • Posts: 1330
Re: I am manufacturing my V Interconnect Cables again
« Reply #16 on: December 28, 2018, 11:24:39 AM »
Steve,
I've got a Wywires silver that isn't really being used. PM me.

Scott
Speaker-GR Research LS9-XStatik-AltecFlamenco
Amp-Moscode,Dodd,Folsom
Pre-Dodd
Turntable-Vyger,Victor,TechnicSP10MK2
Phonopre-Hagermann,Jolida,GSlee   
Cable-AudioSensibility Wywires TWL
Cartridge-Dynavector,Sumiko
Tonearm-PioneerP3,Jelco
Rythmic sub

Online P.I.

  • Industry Participant
  • *
  • Posts: 1922
  • Silence is that blackness beneath the music
    • P.I. audio group, LLC
Re: I am manufacturing my V Interconnect Cables again
« Reply #17 on: December 28, 2018, 12:37:34 PM »
Gents, I was just given a Mode 2, and it sounds very nice indeed. However, along with the Mode 2, I was also given a
6 foot walmart usb cable to use. Nice since I don't have a usb cable myself.

I was wondering if anyone would be willing to loan me a spare usb cable for experimentation and possible short review?
I would like to find out if and how much difference a usb cable might make vs a cheapy.

Of course I would return your usb cable in a week or two, you set the time limit.

cheers

steve
Steve,  I’ll send you a couple when we return to Albuquerque after the first of the year.  PM me your mailing address, please.  I’ll need a little time to build them and do a bit of break-in.  Keep them as long as it takes.  They will be labeled #1, #2 etc...  lengths will be 1.5m.  That is the best sounding length I have found.

It will be interesting to read your observations  :thumb:
« Last Edit: December 28, 2018, 12:44:43 PM by P.I. »
"A man with an experience is never at the mercy of a man with an argument." - Hilmar von Campe

Offline steve

  • Audiologist
  • *
  • Posts: 1239
Re: I am manufacturing my V Interconnect Cables again
« Reply #18 on: January 01, 2019, 01:37:05 PM »
I will need until the latter part of next week before I can experiment. It will take approximately 2 weeks before I report
on tests. I hope that is ok. Will pm each with my address.

Thank you again Gents, for loaning me your cables. Should be interesting to compare them.

Steve
Steve Sammet (Owner, Electron Eng, SAS Audio Labs, Ret)
SAS "V" 39pf/m 6N copper ICs,
SAS Test Phono Stage
Acutex 320 STR Mov Iron Cart
SAS 11A Perfect Tube Preamp
SAS 25 W Ref Triode/UL Monoblocks
2 way Floor Standing Test Speakers

Offline steve

  • Audiologist
  • *
  • Posts: 1239
Re: I am manufacturing my V Interconnect Cables again
« Reply #19 on: February 25, 2019, 06:28:33 PM »
There has been a delay in receiving all the cables, but one set of USB cables is on its way right now and should arrive by the end of the week. I already have two different cables, a single shielded generic, and a double shielded generic with gold plated connectors.

Anyone else wish to send USB for comparison, please pm me or email me at:  sasaudio (at) omnilec.com
My email is also good for those who wish to contact me for the "V" interconnect cables.

cheers

steve

« Last Edit: February 25, 2019, 06:54:27 PM by steve »
Steve Sammet (Owner, Electron Eng, SAS Audio Labs, Ret)
SAS "V" 39pf/m 6N copper ICs,
SAS Test Phono Stage
Acutex 320 STR Mov Iron Cart
SAS 11A Perfect Tube Preamp
SAS 25 W Ref Triode/UL Monoblocks
2 way Floor Standing Test Speakers

Offline steve

  • Audiologist
  • *
  • Posts: 1239
Re: I am manufacturing my V Interconnect Cables again
« Reply #20 on: March 12, 2019, 08:42:19 PM »
Rearranging things. Here is a photo of my "V" interconnects. 

6N pure copper wire
Modified Vampire all copper, gold plated plugs

Cheers

Steve
« Last Edit: March 12, 2019, 08:52:30 PM by steve »
Steve Sammet (Owner, Electron Eng, SAS Audio Labs, Ret)
SAS "V" 39pf/m 6N copper ICs,
SAS Test Phono Stage
Acutex 320 STR Mov Iron Cart
SAS 11A Perfect Tube Preamp
SAS 25 W Ref Triode/UL Monoblocks
2 way Floor Standing Test Speakers

Offline steve

  • Audiologist
  • *
  • Posts: 1239
Re: I am manufacturing my V Interconnect Cables again
« Reply #21 on: March 24, 2019, 05:14:13 AM »
Here is a much better photo of the "V" Interconnect Cable. Truly natural music from bass
through treble. Great for line level connecting. Full 30 day money back guarantee.

Specifications:

Capacitance                                    39pf per meter
Wire                                                6n pure wire
Plugs                                               Vampire all copper/gold plated and modified
Shielded                                          No
       
1/2 Meter                                        $140.00/pr
1 Meter                                           $180.00/pr
1.5 Meter                                        $220.00/pr

Cheers

steve

« Last Edit: March 24, 2019, 05:36:18 AM by steve »
Steve Sammet (Owner, Electron Eng, SAS Audio Labs, Ret)
SAS "V" 39pf/m 6N copper ICs,
SAS Test Phono Stage
Acutex 320 STR Mov Iron Cart
SAS 11A Perfect Tube Preamp
SAS 25 W Ref Triode/UL Monoblocks
2 way Floor Standing Test Speakers

Offline steve

  • Audiologist
  • *
  • Posts: 1239
Re: I am manufacturing my V Interconnect Cables again
« Reply #22 on: March 24, 2019, 07:15:40 PM »
The link leads to a review of the "V" interconnect cable in the signal and noise forum.

http://www.audionervosa.com/index.php?topic=7076.0

cheers

steve
Steve Sammet (Owner, Electron Eng, SAS Audio Labs, Ret)
SAS "V" 39pf/m 6N copper ICs,
SAS Test Phono Stage
Acutex 320 STR Mov Iron Cart
SAS 11A Perfect Tube Preamp
SAS 25 W Ref Triode/UL Monoblocks
2 way Floor Standing Test Speakers